Can Seam Integrity Secured Through Every Changeover
Most beverage bottling facilities rely on pin height settings, manual gauges and experience of the operators to ensure can seam integrity and quality. This is where leakers escape the initial inspection and make themselves visible only when they reach the warehouse.
The issue is even more critical in modern lightweight cans, especially during format changeovers on high speed canning lines.
The Challenge - Can Seam Issues
A large beverage bottling facility was facing intermittent can seam quality issues following format changeover. The plant was finding it difficult to find the source of the problem using standard checks and equipment.
While setup equipment can indicate that the can seamer machine is ‘in spec’, it may still not function as intended. The thing to focus on is not the pin height, but rather the amount of force being applied to the container. Too much force and you end up with dented cans. Too little and the seam wouldn’t be tight enough, leading to leakers.
Changeovers and format changes makes this even more complicated. For example, switching from a 7.5 oz can to a 12 oz can introduce variables such as:
- Pin height adjustment
- Shift setup differences
Small deviations can lead to reduced output and running lines at lower speeds to control wastage. All this adds up in terms of cost and wasted man-hours.
The SmartSkin Solution - Measuring Vertical Force
According to SmartSkin experts, the focus shouldn’t only be on the pin height, but also on the amount of force being applied to the can. But how can you measure the amount of force inside the seamer?
This is where SmartSkin’s Top Load Digital Container Twin comes in. An exact replica of the beverage can, the Top Load Digital Container Twin travels along the line through the filler and seamer at full speed to capture the exact amount of load being applied to the top of the can during the seaming process.
The Outcome - Solving Can Seam Integrity
The plant partnered with SmartSkin to deploy the Top Load Digital Container Twins that revealed the root cause of the problem to be in the seamer head. This was achieved by measuring the exact vertical load being applied to the cans. Corrections to the machine were applied and this reduced the number of leakers and the line was back to a stable, high speed operation.
This was achieved within hours with SmartSkin as opposed to days using standard defect detection methodologies. The plant adopted SmartSkin as a repeatable verification step during changeovers that will save them thousands of dollars in wasted manhours.
To learn how you can implement similar savings at your plant, download the case study below.
Highlights
Seam leaks resolved after correction
Clear ROI with faster, confident changeovers
Lower risk of repeated setup cycles
Download the case study
Related Posts
Elimination of rejects and spillage using SmartSkin’s Tilt data